An ideal direct drive brushless outrunner for 3D electric models weighing 6-9 ounces (170-225g) or sport and scale models of 8-12 ounces (225-340g) Includes safety prop adaptor, motor mount and all necessary hardware.

Diameter:	1.1inch (28mm)
Case length:	0.87inch (22gm)
Weight:	0.8ounce (24gm)
Shaft diameter:	3.2mm (0.125inch)
KV	1380 (rpms per volt)
Continuous current:	7 Amp
Maximum burst current:	9 Amp (15 seconds maximum)
Controller:	ESC 9 to12 Amp Brushless required
Prop:	6x5 to 8x3.8 (3cells) or 10X3.8 (2-cells) slow flyer
Cells:	6-10 Ni-MH/Ni-CD or 2-3s Li-Po